Printer not able to connect after upgrading the cable internet


My name is Ola and I’m having issues with a HP ENVY 5530 printer I have in my home that was working properly then I had an upgrade on my cable and it didn’t connect my printer. I tried to fix the problem and believe I created a bigger problem for myself. I think I’m connecting to someone else printer because I’m not receiving anything. Not sure of my IP number

venmartin Changed status to publish August 13, 2018
Add a Comment
Cynichrut (anonymous) 0 Comments

To begin make sure the printer and wireless router are at least 6 feet apart from each other.
Reset your printer back to Network Defaults as the printer settings are still set to the previous modem.  Then run the Wireless Setup Wizard to connect. Both of which can be accessed from the printer front panel or computer.  If there is no front panel on the printer for configuration, you can use your Printer USB cable to connect. You can also try the WPS method if your router/printer supports it, try this method only if the Wizard or Printer USB cable is not available.
Set the router to a fixed wireless channel like 1, 6 or 11, never ‘auto’.  Try channel 1 first then the other channels, one at a time.
The router must use a 2.4Ghz SSID band enabled to communicate with the printer and set a  different name than your 5.0Ghz SSID band in your router.

venmartin Changed status to publish July 9, 2018
Add a Comment
Write your answer.